To deep clean your bottle sterilizer, you will need hot water, dish soap, and a scrub brush. Fill the hot water tank in the machine with enough water to cover the machine’s bottom. Add enough dish soap to make a sudsy mixture. Pour the sudsy mixture into the scrub brush and scrub the machine’s interior surfaces. Rinse off the machine with cold water.

There are a few ways to clean a baby’s steriliser. One way is to fill the steriliser with warm water, put the baby in it, and turn it on. The machine will clean the baby and sterilise it. Another way is to fill a sink with warm water and put the baby in it. The baby will clean itself and sterilise itself.

To descale a sanitizer, pour 1 cup of white vinegar into the container and turn it on to full power. Leave it running for at least 30 minutes, or until the sanitizer is clean. Pour a pot of water into the same container and turn off the sanitizer. Pour the pot of water into the sanitizer and let it soak for a few minutes. Turn off the water and drain the sanitizer.

Your steriliser may be going brown because of build-up of residue from previous uses. Clean the steriliser with a damp cloth and detergent, then run it on the sanitiser cycle.

To descale a sterilizer with vinegar, fill the machine with half a cup of white vinegar and one cup of water. Turn on the machine and wait until it reaches the sterilization cycle. Pour the vinegar mixture into the machine and turn off the power. Wait 10 minutes, then turn on the power and wait until it reaches the rinse cycle. Pour a pot of cold water into the machine and wait 10 minutes.

Yes, you should dry bottles after sterilizing them. This will help to prevent mold and bacteria growth.

Bottles should be sterilised when the seal is broken or when the bottle is no longer being used.

Tommee Tippee sterilisers typically take around 60 minutes to complete their cycle.

Yes, vinegar can be used to clean an autoclave. Vinegar is a mild acid and will remove dirt, grease, and other contaminants from the autoclave.

If your Baby Brezza sterilizer is less than one year old, we recommend that you descale it by using the following instructions:1. Fill a pot with water and place it on the stove.2. Turn the heat to medium-high and wait until the water begins to boil.3. Add 1 cup of white vinegar to the pot and stir.