Vivo has recently unveiled its new Vivo V19’s global variant on April 6, 2020. This new smartphone Vivo V19 features Snapdragon 712 SoC coupled with 8GB RAM, 256GB of UFS 2.1 storage. It has stunning quad cameras with a 48MP primary sensor, dual front cameras, 4500 mAh battery with 33W fast charging.

In this tutorial, we will guide you to remove the FRP lock on your Vivo V19 PD1969F smartphone. Follow this method to bypass the FRP or Google verification using the ISP pinout method. You can find Vivo V19 ISP Testpoint here.

Also Read

Common Problems in Vivo V19 and Solutions – Wi-Fi, Bluetooth, Camera, SIM, and More

Vivo V19 PD1969F Firmware Flash File (Stock ROM Guide)

How to Unlock Bootloader, Root and Install Custom ROM on Vivo V19

Will Vivo V19 Get Android 12 (Funtouch OS 12) Update?

Vivo V19 PD1969F ISP PinOUT | Test Point | EDL Mode 9008

Vivo V19 Specifications:

The Vivo V19 comes with a 6.44 inches Super AMOLED display with a Full HD+ resolution. It also means that it has pixels of 1080 x 2400 pixels. This display also has a screen to body ratio of 83.7 percent, an aspect ratio of 20:9, and a pixel density of 409 Pixel Per Inch ( PPI ).

Coming to the internals of Vivo V19, it is powered by an octa-core Qualcomm Snapdragon 712 processor. This SoC is built on the 10nm process and has 2 Kryo 360 Gold cores clocked at 2.3GHz. And other six Kryo 360 Silver cores clocked at 1.7GHz. To the GPU side, it sports the Adreno 616 GPU. Talking about the memory side, it comes with a single RAM variant i.e., with 8GB. And, to the other side, it sports 128 and 256GB of UFS 2.1 onboard storage. The interesting fact here is that the device comes with support for external storage, and it has a dedicated SIM card slot. This new smartphone runs on the Funtouch 10.0 that is based on Android 10.

Coming to the cameras, the Vivo V19 on the rear packs a quad camera, and to the front dual-camera setup. This quad rear camera includes a 48MP primary sensor with an aperture value of f/1.79 and PDAF. It packs a secondary 8MP ultra-wide sensor with an aperture value of f/2.2, a tertiary 2MP macro sensor with an aperture value of f/2.4 aperture, and finally, a 2MP depth sensor with an aperture value of f/2.4. This rear camera setup also comes with support for autofocus, LED flash, and HDR. To the front, it sports a primary 32MP sensor with an aperture value of f/2.1, and it also sports an 8MP ultra-wide sensor with an aperture value of f/2.3.

The Vivo V19 packs a 4,500 mAh battery with support for 33W fast charging tech. It is known as Vivo Flash Charge 2.0. It is available in Gleam Black and Sleek Silver colors. Connectivity options include Wi-Fi 802.11 a/b/g/n, dual-band, Wi-Fi Direct, hotspot, Bluetooth 5.0, A2DP, LE, GPS with A-GPS, GLONASS, GALILEO, BDS, USB 2.0, Type-C 1.0 reversible connector. Sensors include accelerometer, ambient light sensor, compass/ magnetometer, gyroscope, proximity sensor, and in-display fingerprint sensor.

Instructions To Bypass FRP lock on Vivo V19 using UFI

Make sure to download the required tool and drivers to complete this process successfully.

Required Downloads

  • Download UFi Box eMMC Service Tool
  • Install Vivo USB Drivers on your PC

Pre-Requirements:

  • This guide is for the Vivo V19 PD1969F variant only.
  • You will need a Windows PC/Laptop and a USB cable.

Well, ‘FRP’ known for the term “Factory Reset Protection.” It’s a security measure taken by Google for Android platforms and devices running on the Android 5.1 Lollipop or above version. This functionality gets activated once you sign in to a Google Account on your Android device. And once it is activated, it will prevent you from using the phone until you enter the previous Google Account Credentials. It will remain the same as well, even after doing the factory data reset.

Also Read: Vivo V19 Firmware flash file

  • Open the back panel of the device at first.

  • Connect the wire with the correct ISP Pinout.

  • Then connect the ISP Pinout to the UFi Box and connect your device via USB cable to the PC.

  • Go to the Device Manager on your PC.

  • You will see your device in the list > run the UFi Box and locate the scatter file.

  • Go to the user Partition / Special Task and click on Reset FRP on the UFI Box.

  • You’re done.

Steps to Hard Reset Vivo V19 (Bypass Pattern Lock)

  • Remove the back panel of the Vivo V19 and connect the wire to the ISP Pinout.
  • Next, connect the correct ISP Pinout to the UFi Box.
  • Connect your Vivo V19 to the PC via a USB cable.
  • Head over to the PC and open Device Manager.
  • If your device is located there, run the UFi Box.

Advertisement

  • Locate the scatter file > go to the Partition / Special Task on the UFI Box.
  • Click on Factory Reset.
  • Enjoy!

That’s it, guys. We hope this guide was helpful to you in order to bypass the FRP Lock or perform a factory reset on your Vivo V19 (PD1969F) handset.